RED AGAVE
All Projects
Finished steel edging running into boulders in an East Austin front yard, holding black mulch with a fern on one side and river rock on the other, beside sod and dark stone pavers
Project East Austin, Texas

Steel Edging Cut Into Boulders

Residence · East Austin, TX 1/4-inch steel · Boulders · Angle grinder · Mulch and river rock
Scroll
Quarter-inch steel edging seated in a slot cut into a boulder, with the steel turning a sharp corner beside the stone, during the build in East Austin
01 · The SlotSteel seated in the stone
Steel edging running in straight lines between boulders during installation, with a level across the top and a sledgehammer beside it, in East Austin
02 · The RunLevel across the top
Fern in black mulch in front of a steel edge that holds river rock, between two boulders, with sod beyond, in East Austin
03 · FinishedMulch / steel / river rock
Steel Into Stone
One line. No gap.
Close view of a steel plate seated in a slot cut into a boulder, in East Austin Close view of a run of steel edging ending inside a boulder, with a level across the top of the steel, during the build in East Austin Close view of finished steel edging meeting a boulder, with black mulch, a fern, and a small plant with purple flowers in front and river rock behind, in East Austin
Stone · 01

The Slot

Angle Grinder · Cut to Fit

An angle grinder cuts a narrow slot down into the rock, just wide enough for the plate. The 1/4-inch plate slides into the slot and stops inside the stone.

Steel · 02

The Run

Straight Lines · Sharp Corners

The steel runs in straight lines between the boulders, with sharp corners where the line turns. A level across the top of the steel checks the run.

Finish · 03

No Gap

Mulch · River Rock

The edge holds black mulch on one side and river rock on the other. Where it meets a boulder the steel is inside the stone, so the rock has no opening to spill into the mulch.

01 / 03
Scroll to advance
Takeoff

What was built.

01 / Steel
1/4-Inch Edging
  • 1/4-inch mild steel plate
  • Cut, bent, and welded on site
  • Straight runs and sharp corners
  • Natural rust patina
02 / Stone
Slotted Boulders
  • Boulders set before the steel
  • Slot cut with an angle grinder
  • Steel seated inside the stone
  • Run checked with a level
03 / Ground
Beds
  • Black mulch on one side of the steel
  • River rock on the other
  • Fern in the mulch
Area
East Austin
Steel
1/4 Inch
Tool
Angle Grinder
Stone
Slotted Boulders
Project Notes

Questions about this build

Can steel edging go through a boulder?
Yes. In this East Austin front yard we cut a slot into each boulder with an angle grinder and seated the steel inside it, so the edge runs into the stone with no gap.
Why cut the boulder instead of stopping the steel beside it?
A gap is where an edge fails. Steel edging keeps two materials apart. With the steel inside the stone, there is no opening for the river rock to spill into the mulch.
How thick is the steel?
1/4 inch. It is cut, bent, and welded on site, and it stays straight where thin 1/8-inch edging bows.
Is the boulder set before or after the steel?
Before. The boulder is set in place, and the steel is cut and fitted to it.
Does the steel rust?
Yes, by design. The edging is mild steel, and it develops a natural rust patina over 6 to 12 months.
Who designed and built it?
Red Agave Landscape designed it, and it was built by our own crew. Every project starts with a free consultation, and the CAD plan is included.
Finished screened room with black-framed screens and a cedar ceiling on a concrete slab at the back of a house in South Austin
Next / 11

Screened Room.

Continue the journey